Skip to content
A new exterior panel and meter on a Sacramento-area stucco home

Insurance-flagged panels

Keep your home insurance with a safe, modern panel

California insurers are requiring homeowners to replace certain electrical panels before they’ll write or renew a policy. If yours was flagged, Byron replaces it with permits secured and the work inspected and approved. That’s exactly what insurers ask for.

  • Panels insurers flag, replaced
  • Permit and final inspection
  • Paperwork for your insurer
  • Inspection ahead of time if you’re unsure

What’s happening

Why insurance companies are flagging panels

Many California insurers are now refusing or dropping coverage for homes with outdated electrical panels. It usually comes up at application or renewal, often with a deadline attached, and it can happen even if you’ve never had an electrical problem.

Insurers want these panels replaced by a licensed electrician, with permits secured and approved. WiseCo does that work every week, and Byron explains each step as he goes.

Panel replacement, 200 amps, permits included

from $4,400

Most insurance-driven replacements are standard panel swaps. Your exact price depends on the service type, the meter and access, and is confirmed before any work starts.

  • Free estimate, firm quote by the job
  • Permits handled when required
  • 1-year parts and labor guarantee

What insurers ask for

A licensed replacement, with permits and final approval

Insurers want the flagged panel replaced by a licensed electrician, with the permit secured and the work inspected and approved. That’s exactly what WiseCo does, and Byron handles the paperwork from start to finish.

  • Licensed C-10 contractor, CSLB #820270
  • Permit pulled and inspection passed
  • Utility disconnect and reconnect coordinated
  • Documents you can send to your insurer

What insurers flag

Panels and equipment insurers commonly ask about

Requirements vary by insurer, so check your notice. These are the ones Byron sees most.

Why it matters

Why insurers require the change

  • Some older panels may fail to trip during an electrical fault
  • Fire risk goes up with outdated, overheated or damaged equipment
  • Several brands are discontinued, so safe replacement parts are hard to find
  • A replacement with permits gives the insurer documented proof the hazard is gone

How it works

From insurance notice to approved replacement

  1. 01

    Send your notice

    Text Byron a photo of the notice and your panel. He’ll confirm whether it’s on the list and what the insurer is asking for.

  2. 02

    Firm quote and date

    You get a firm price and a date that works with your insurer’s deadline. Byron pulls the permit.

  3. 03

    Replacement

    The old panel comes out and a new one goes in, to current code, with the utility coordinated.

  4. 04

    Inspection and paperwork

    The work is inspected and approved. You get the documentation your insurer needs to close it out.

Before the replacement

This is the kind of panel insurers are flagging

Older exterior panels like this one are what insurers ask homeowners to replace at application or renewal. Byron replaces them with new equipment and gets the permit closed, so you have what your insurer needs.

Not sure about yours? Text a photo of the panel and its label, and Byron will tell you straight.

An older exterior electrical panel on a Sacramento-area home before WiseCo replaced it
Real WiseCo jobAn original panel, before replacement.

Questions

Common questions

Don’t see yours? Text Byron. You’ll get a real answer from the person doing the work.

Text a question

See all frequently asked questions

Which panels do insurers flag?

Insurers commonly flag Zinsco, Federal Pacific (FPE), Challenger, Pushmatic, Bulldog panels, fuse boxes installed before 1990, and panels more than 40 years old. Requirements vary by insurer, so check your notice.

What do insurers need from me?

Usually proof that a licensed electrician replaced the panel with a permit, and that the permit was approved after inspection. WiseCo provides that documentation when the job is done.

I’m not sure what brand my panel is. Can you check?

Yes. Text a photo of the panel with the door open, including any labels. If it’s unclear, Byron can inspect it ahead of time to see whether it’s affected.

My renewal deadline is close. How fast can you do it?

Call as soon as you get the notice. Byron will work with your deadline where the schedule allows, and the permit and inspection timing is part of the plan from the start.

Do I have to upgrade to 200 amps?

No. Insurers care that the flagged panel is replaced. Many homes replace it at the same size; others upgrade to 125 or 200 amps while the work is being done. Byron will explain the options and prices.

Google reviews

What homeowners say after an insurance panel swap

Read more WiseCo reviews

Help paying for it:Wisetack financing SMUD rebates

Equipment and brands Byron installs

  • Eaton
  • Square D
  • Siemens
  • Leviton
  • Tesla
  • Lutron Pro Residential

Brand names are trademarks of their owners and are listed to show the equipment we install, not an endorsement.

Free, no-obligation quotes

Got an insurance notice? Send it to Byron.

Text a photo of the notice and your panel. You’ll hear back from the electrician who will do the work.

Monday–Friday, 8am–5pm · Saturdays by appointment

Request a free quote

Goes straight to Byron, the electrician who’ll do the job

Type of work
Photos (optional)

Up to 3 photos. Or text them to (916) 752-4303.

Best way to reach you
  • Free estimate
  • Firm quote by the job
  • CSLB #820270

We never share your information. See our privacy policy.