
Panel upgrades & replacements
Electrical panel upgrades, done right the first time
Your breaker panel is the heart of your home’s electrical system. Whether you’re remodeling, adding an EV charger or heat pump, or replacing an outdated breaker box, Byron installs safe, code-compliant panels with permits and no shortcuts.
- Hundreds of panels replaced
- 100 to 200 amp service
- Permits and inspection handled
- 200A panels from $4,400
Why it matters
When it’s time to upgrade your panel
Older panels, including the Zinsco panels found throughout the Sacramento area, can be a safety risk and can limit what you’re able to add to your home. A modern 100, 125 or 200 amp panel safely supports today’s electrical demands and leaves room for tomorrow’s upgrades.
Not every home needs a bigger panel, though. If someone is trying to sell you an expensive upgrade, call Byron first. He’ll look at your panel and tell you honestly whether a new circuit or a load calculation is the better answer.
Standard 200-amp panel, permits included
from $4,400
Applies to a straightforward, overhead-fed replacement with uncomplicated access, including standard equipment and permits. After hundreds of panel upgrades, Byron can usually quote from a short conversation and a few photos.
- Free estimate, firm quote by the job
- Permits handled when required
- 1-year parts and labor guarantee
Insurance renewal coming up?
Get your panel checked before the letter arrives
Insurers are flagging Zinsco, Federal Pacific, Challenger, Pushmatic and Bulldog panels, fuse boxes installed before 1990 and panels more than 40 years old, usually at application or renewal. Byron can inspect yours ahead of time and tell you straight whether it’s affected.
- Inspection before your renewal date
- Permits secured and approved
- New panel with standard equipment
- Starting at $4,400 for a 200A upgrade
Signs you need one
Common reasons homeowners call about their panel
- Breakers trip often, or lights flicker when appliances start
- You’re adding an EV charger, heat pump, hot tub or electric water heater
- There’s no space left in the panel for a new circuit
- You’re planning a remodel, addition or ADU
- You have an older panel brand like Zinsco or Federal Pacific (FPE)
- Your insurance company flagged the panel at application or renewal
- You still have a fuse box, or the panel is more than 40 years old
- Scorch marks, buzzing, a warm panel cover or corrosion inside the box
Our process
What a panel upgrade with WiseCo looks like
- 01
Photos and a quote
Text photos of your panel, meter and the area around it. Often that’s enough for a firm price. If not, Byron comes out to look.
- 02
Permit and utility
Byron pulls the permit and coordinates the disconnect and reconnect with SMUD or PG&E, so you don’t have to.
- 03
Clean installation
New panel, breakers and grounding installed to current code, with minimal disruption and a clean work area.
- 04
Inspection and walkthrough
Everything is tested, inspected and labeled. Byron walks you through the new panel before he leaves.
Why WiseCo
Why homeowners choose Byron for panel work
Licensed since 2003
California C-10 Electrical contractor, CSLB #820270, with about 40 years of hands-on experience.
SMUD and PG&E know-how
Local experience with utility requirements, service disconnects and inspections across Sacramento County.
Priced by the job
Upfront, fair pricing with free estimates. You know the full price before any work starts.
SMUD rebates and financing
SMUD Contractor Network member, so Byron can help with rebate paperwork. Wisetack financing for qualifying customers.
From the job site
A panel swap, start to finish, by one electrician
Byron removes the old panel, sets the new one, moves every circuit over and labels it, then schedules the inspection. The utility disconnect and reconnect are coordinated for you.
You deal with one person the whole way, from the first photo you text to the final inspection.

Questions about your home? Ask Byron directly.
Call, or text photos of your panel and the work area. Often that’s enough for a price.
Questions
Common questions
Don’t see yours? Text Byron. You’ll get a real answer from the person doing the work.
Text a questionHow much does it cost to replace or upgrade an electrical panel?
Standard, overhead-fed 200-amp panels, including permits, start at $4,400. Underground service, relocating the panel, a meter upgrade or extra repairs add to the cost. Byron can usually give you a firm quote after a short conversation and some photos sent by text or email.
Do I need 200 amps?
Not always. Many homes do fine on 100 or 125 amps. If you’re adding big loads like an EV charger, heat pump or electric water heater, a load calculation shows whether your current service can handle it before you spend money on an upgrade.
How long will my power be off?
For a typical replacement, power is off for part of one day. Byron will tell you what to expect ahead of time, and the utility reconnect is scheduled as part of the job.
Do you handle the permit and the utility?
Yes. Byron pulls the permit, schedules the inspection, and coordinates the disconnect and reconnect with SMUD or PG&E.
Can SMUD rebates help with the cost?
In some cases, yes. SMUD offers programs and rebates that can apply to panel upgrades, depending on your project. WiseCo is in the SMUD Contractor Network and can submit rebate requests for you.
Panel upgrades & replacements near you
- Panel upgrades & replacements in SacramentoPre-war homes in East Sacramento, Land Park and Curtis Park often still run on 60–100 amp services that can’t carry a modern kitchen, an EV and a heat pump together.
- Panel upgrades & replacements in CarmichaelMany Carmichael homes still have the 100 amp panel they were built with, now 50 or more years old.
- Panel upgrades & replacements in Fair OaksMany Fair Oaks homes still have original 1960s–80s panels, often with an add-on subpanel that’s run out of room too.
- Panel upgrades & replacements in Citrus HeightsOriginal 100 amp services in 1960s–80s Citrus Heights homes are reaching the end of their life; many owners upgrade while replacing a flagged panel.
- Panel upgrades & replacements in FolsomFolsom homes from the 1980s and 90s often have 100–150 amp services that run out of room once EVs and heat pumps arrive.
- Panel upgrades & replacements in Rancho CordovaOlder Rancho Cordova homes near Folsom Boulevard often still have 100 amp services that can’t carry an EV and a heat pump together.
Panel upgrades & replacements across the WiseCo service area
Sacramento County
Placer County
El Dorado County
Equipment and brands Byron installs
Brand names are trademarks of their owners and are listed to show the equipment we install, not an endorsement.

Free, no-obligation quotes
Thinking about a new panel? Start with photos.
Text a photo of your panel and meter. Byron will tell you what you need, and what you don’t.
Monday–Friday, 8am–5pm · Saturdays by appointment

